Single-Process

All Process
Contact us for help?

Oxyfuel Cutting

oxyfull cutting

Oxyfuel flame cutting is the most economical process for the cutting of mild and low alloy steels, even with weld preparations. It is one of the most important production processes in the metal industry.

Process Details

Our products cover the whole range of cutting tasks in modern metal industries. Using different thermal cutting technologies for straight cutting, our machines can be easily adapted to your requirements.

straight cutting oxyfull

Bevel cutting requires an exact knowledge of the machine and the cutting processes. Corners, lead-ins and run-outs have to be cut with special cycles if the required quality is to be achieved. Bevel cutting also places high demands on the programming of the cutting plan. Special auxiliary functions are needed to set the units up for bevel cutting.

bevel

Plasma Cutting

plasma cutting

Plasma cutting was originally developed for the thermal cutting of materials which were unsuitable for flame cutting, such as high alloy steels or Aluminum. Today, the process is also used for the economical cutting of thin, low alloyed steels.

Key Features:

  • Low investment cost
  • Low running cost
  • Easy to use
  • Positive bilateral longitudinal drives for good acceleration
  • Reliable automatic hight sensing
  • 35 m/min drive speed saves time between cuts
  • No moving parts in the laser resonator
  • Completely maintenance free

Process Details

Plasma Bevel Cutting

plasma bevel cutting

Bevel cutting requires an exact knowledge of the machine and the cutting processes. Corners, lead-ins and run-outs have to be cut with special sequence if the required quality is to be achieved. Bevel cutting also places high demands on the programming of the cut parts. Special auxiliary functions are needed to set the units up for bevel cutting.

Laser Cutting

laser cutting

Basically when cutting with the laser the beam is focused on the material through the hole in the nozzle. This heats the material and melts it. A cutting gas, which as a rule flows co-axially through the nozzle, removes the molten material.

Process Details

Messer’s Thermal Cutting Machine and Technologies, tending to the full scope of thermal cutting procedures with high -immaculateness gasses, adaptable supply arrangements, best in class gear and supporting services. Our products cover the whole range of cutting tasks in modern metal industries. Using different thermal cutting technologies for straight cutting, our machines can be flexibly adopted to your requirements.

straight cutting laser

Bevel cutting requires an exact knowledge of the machine and the cutting processes. Corners, lead-ins and runouts have to be cut with special sequence if the required quality is to be achieved. Bevel cutting also places high demands on the programming of the cut parts. Special auxiliary functions are needed to set the units up for bevel cutting.

bevel cutting laser
Contact us for help?